Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

SS 316Ti Hollow Bars Suppliers. UNS S31635, 1.4571 SS Bars, Stainless Steel 316Ti Hollow Bars

///316Ti Stainless Steel Hollow Bars

316Ti Stainless Steel Hollow Bars

310

Manufacturers & Suppliers of 316Ti Stainless Steel Bars, UNS S31635, 1.4571 SS Bars! Lowest Steel Bars Prices!

Are you looking for a genuine and professional manufacturer and supplier of 316Ti stainless steel Bars? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

Stainless steel 304H hollow bars come in a wide range of sizes measured accurately to your specification. 304H Hollow Bar is a cylindrical shape and is widely used in the construction, manufacturing and automotive industries.

  • High Precision Tolerances: Our hollow bars can meet tolerance H7, H8, H9 according to the customer’ requirements, and its I.D dimension.
  • Hollow Bars for high pressure resistance: Asiamet supplies stainless steel hollow bars which can work under higher pressure.
  • High Smooth Inside Surface: The roughness of our hollow bars is Max Ra 0.4 microns ID finish, 16Max Ra ID Finish.

Stainless steel hollow bars supplied by Asiamet can be hardened by heat treatment and offer excellent strength and toughness, high resistance to general and stress corrosion, good workability, and magnetic.

  • Stainless steel hollow is also typically supplied as Cold Drawn or Hot Rolled product, and is available in cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP.
  • Standard Specification Stainless Steel Hollows – ASTM A276, ASTM A484, ASTM A479, ASTM A182

Our Company, Asiamet is a well known supplier of stainless steel hollow bars produced from high quality raw materials, as per international standards. With an experienced and professional sales team, we supply stainless steel hollow bar products to many countries and all over India.

Why Choose Asiamet as your Supplier for Stainless Steel 316Ti Hollow Bars, UNS S31635, 1.4571 SS Hollow Bars?

  • Competitive or Lowest Prices for 316Ti Stainless Steel Hollow Bars – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel hollow bars. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for Stainless Steel 316Ti Hollow Bars – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for Stainless Steel 316Ti Hollow Bars– Since we are a leading stockholder and direct mill buyer of stainless steel hallow bars, we can offer delivery of cut to width stainless steel flat bars in 1 or 2 days. For production quantities, we can supply stainless steel hollow bars with shortest possible lead times.
  • In House 316Ti Stainless Steel Hollow Bars Processing Facilities – We have in house stainless steel hollow bars processing facilities enabling us to deliver the product in various forms other than standard sizes.

Description

Stainless Steel 316Ti Bars, UNS S31635, 1.4571 Manufacturers & Suppliers in India – Buy High Quality Stainless Steel Hollow Bars!

Asiamet is one of the biggest manufacturers and producers for stainless steel hollow bars in 316, 316L and 316Ti grades. We can supply various sizes of stainless steel  316Ti hollow bars at the most competitive prices in the industry. Stainless steel 316Ti hollow  bars supplied by Asiamet, are widely used in many industries. Finishes on stainless steel 316Ti hollow bars can vary and include cold drawn, smooth turned, rough turned, turned ground and polished. Asiamet supplies metric size and imperial size 316Ti hollow bars with random length or fixed length up to 6 meters. Typical applications of hollow bars include manufacturing bushes, cylinders, conveyor rolls, hollow shafts, hollow components, nuts, and rings.

Due to its anti-corrosive properties, stainless steel 316Ti bars have become essential in the manufacturing of parts for the medical, tooling, mechanical, engineering and food industries.

  • 303 stainless steel bars- has good corrosion resistance, free machining, not suitable for welding or forming.
  • 304 stainless steel bars – has good corrosion resistance, suitable for forming and welding, average machining.
  • 316 stainless steel bars – Is our highest grade and has excellent corrosion resistance, is suitable for forming and welding, but is a little harder to machine

Stainless steel is one of the most widely used and versatile type of steel. Stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. There are more than 60 grades of stainless steel and divided into five families.

Production & Stock Range for Stainless Steel 316Ti Hollow Bars, UNS S31635, 1.4571 SS Hollow Bars

Product Stainless Steel 316Ti Hollow Bars
Standard ASTM/ASME A/SA276, ASTM/ASME A/SA479, ASTM/ASME A/SA 484
Length Custom Length, Upto 6 Meters
Size
  • Metric size honed tubes: I.D 30 mm to I.D 500 mm, Wall thickness 3 – 50 mm
  • Imperial size honed tubes / inch size honed pipe: 1.5” ID – 14.0” Honed ID; 1/8” – 1” wall thickness
Testing 100% Ultrasonic Test, Chemical & Mechanical Testing
Surface Finish Black, Peeled, Polished, Bright, Hair Line, Brush, Sand Blast
Type Hot Rolled, Cold Drawn, Centerless Grinding, Forged
Surface Treatment Annealed and Pickled
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Viraj, Mukund, Laxcon, Imported, Jindal, Other Indian Manufacturers
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Chemical Composition (%) of Stainless Steel 316Ti Hollow Bars, UNS S31635, 1.4571 SS Hollow Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00

Mechanical Properties of Stainless Steel 316Ti Hollow Bars, UNS S31635, 1.4571 SS Hollow Bars

GRADE Tensile Strength : Unit – ksi (MPa) , Minimum Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum Elongation : in 2″, Unit : % , Minimum HARDNE SS
316 75 (515) 30 (205) 40 95 HRB max
316L 70 (485) 25 (170) 40 95 HRB max
316Ti 75 (515) 30 (205) 40 95 HRB max


Equivalents of Various Grades of 
Stainless Steel 316Ti Hollow Bars, UNS S31635, 1.4571 SS Hollow Bars

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Chemical Composition of Various Grades of Stainless Steel Hollow Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Stainless Steel Hollow Bars

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

Weight Calculation of Stainless Steel bars

Weight of  Stainless Steel Round Bar

Dia ( mm ) X  Dia (mm ) X 0.00623  = Wt. Per. Mtr.

Dia ( mm ) X  Dia (mm ) X 0.0019    = Wt. Per. Feet.

Weight of Stainless Steel Square Bar

Dia ( mm ) X  Dia ( mm ) X 0.00788 = Wt. Per. Mtr

Dia ( mm ) X  Dia ( mm ) X 0.0024   =  Wt.Per. Feet.

Weight of Stainless Steel Hexagonal Bar

Dia ( mm )     X  Dia ( mm ) X 0.00680    =  Wt. Per.Mtr

Width ( mm ) X  Dia ( mm )  X 0.002072 =  Wt. Per Feet

Weight of Stainless Steel Flat Bar

Width  (mm ) X  Thick ( mm ) X 0.00798 = Wt.Per Mtr.

Width  (mm ) X  Thick ( mm ) X 0.00243 = Wt.Per Feet.

PREN for various Grades of Stainless Steel

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 40.2
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2

Alternative Grades to Stainless Steel 316Ti Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel Bars

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel Hollow Bars

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel Hollow Bars

As a standard, Asiamet provides all stainless steel hollow bars marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Hollow Bars

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel hollow bars are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

Reviews

There are no reviews yet.

Be the first to review “316Ti Stainless Steel Hollow Bars”

Your email address will not be published. Required fields are marked *