Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

SS 316L Bars Suppliers. UNS S31603, 1.4404/1.4435, Stainless Steel 316L Bars

///316L Stainless Steel Square Bars

316L Stainless Steel Square Bars

255

Manufacturers & Suppliers of 316L Stainless Steel Square Bars, UNS S31603, 1.4404/1.4435 SS Square Bars! Lowest Steel Bars Prices!

Stainless Steel Square Bar is an extruded product – this gives a good surface finish and nice square edges to the material. All of our stainless steel square bars are supplied in most common Grades are 201, 430, 304 and 316 – this is an excellent general engineering grade of stainless steel. We currently stock a range of stainless steel square bars in both Grade 303 which is the free machining grade & also grade 304 which has decent machinability & excellent weldability.

Are you looking for a genuine and professional manufacturer and supplier of stainless steel bars in India? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

  • Stainless steel square bar is also typically supplied as Cold Rolled or Hot Rolled product, and is available in the following finishes: Black, Peeled, Polished, Bright, Hair Line, Brush, Sand Blast
  • Specification for SS Square Bars- Tolerance to ASTM A480M, Chemical to ASTM A240, Mechanical to ASTM A240

Our Company, Asiamet is a well known supplier of stainless steel 316L square bars produced from high quality raw materials, as per international standards. With an experienced and professional sales team, we supply stainless steel square bar products to many countries and all over India.Stainless steel 316L square bars supplied by Asiamet can be hardened by heat treatment and offer excellent strength and toughness, high resistance to general and stress corrosion, good workability, and magnetic

  • Stainless steel bar is also typically supplied as Cold Drawn or Hot Rolled product, and is available in cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP.
  • Standard Specification Stainless Steel Bars – ASTM A276, ASTM A484, ASTM A479, ASTM A182

Why Choose Asiamet as your Supplier for Stainless Steel 316L  Square Bars, UNS S31603, 1.4404/1.4435 SS Square Bars?

  • Competitive or Lowest Prices for 316L Stainless Steel Square Bars – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel 316L bars. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for 316L Stainless Steel Square Bars – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for 316L Stainless Steel Square Bars– Since we are a leading stockholder and direct mill buyer of stainless steel 316L bars, we can offer delivery of cut to length stainless steel bars in 1 or 2 days. For production quantities, we can supply stainless steel 316L bars with shortest possible lead times.
  • In House 316L Stainless Steel Square Bars Processing Facilities – We have in house stainless steel 316L bars processing facilities enabling us to deliver the product in various forms other than standard sizes.

Description

Stainless Steel 316L Square Bars, UNS S31603, 1.4404/ 1.4435 Manufacturers & Suppliers in India -Buy Quality Stainless Steel 316L Square Bars!

Asiamet is one of the biggest manufacturers and producers for stainless steel square bars in 316, 316L and 316Ti grades. We can supply various sizes of stainless steel 316L square bars at the most competitive prices in the industry. Stainless steel square 316L bars supplied by Asiamet, are widely used in many industries.

Stainless steel is one of the most widely used and versatile type of steel. Stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. There are more than 60 grades of stainless steel and divided into five families.

In addition to the general side of these metal products, special focus is given to a complete range of stainless steel rods and other bar products. The main benefit of Stainless Steel is its resistance to corrosion, and this is all down to the addition of the Chromium

Due to its anti-corrosive properties, stainless steel square bars have become essential in the manufacturing of parts for the medical, tooling, mechanical, engineering and food industries.

  • 303 stainless steel square bars- has good corrosion resistance, free machining, not suitable for welding or forming.
  • 304 stainless steel square bars – has good corrosion resistance, suitable for forming and welding, average machining.
  • 316 stainless steel square bars – Is our highest grade and has excellent corrosion resistance, is suitable for forming and welding, but is a little harder to machine

Production & Stock Range for Stainless Steel 316L Square Bars, UNS S31603, 1.4404/1.4435 SS Square Bars

Product Stainless Steel 316L Bars
Specifications ASTM/ASME A/SA276, ASTM/ASME A/SA479, ASTM/ASME A/SA 484
Length Upto 6 Meters
Size 5.0mm x 5mm to 200mm x 200mm
Testing 100% Ultrasonic Test, Chemical & Mechanical Testing
Surface Finish Black, Peeled, Polished, Bright, Hair Line, Brush, Sand Blast
Type Hot Rolled, Cold Drawn, Centerless Grinding, Forged
Shape Square
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Viraj, Mukund, Laxcon, Imported, Jindal, Other Indian Manufacturers
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Chemical Composition (%) of Stainless Steel 316L Square Barers, UNS S31603, 1.4404/1.4435 SS Square Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00

Mechanical Properties of Stainless Steel 316L Square Bars, UNS S31603, 1.4404/1.4435 SS Square Bars

GRADE Tensile Strength : Unit – ksi (MPa) , Minimum Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum Elongation : in 2″, Unit : % , Minimum HARDNE SS
316 75 (515) 30 (205) 40 95 HRB max
316L 70 (485) 25 (170) 40 95 HRB max
316Ti 75 (515) 30 (205) 40 95 HRB max


Equivalents of Various Grades of 
Stainless Steel 316L Square Bars, UNS S31603, 1.4404/1.4435 SS Square Bars

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Chemical Composition of Various Grades of Stainless Steel Square Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Stainless Steel Square Bars

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

Weight Calculation of Stainless Steel Bars

Weight of  Stainless Steel Round Bar

Dia ( mm ) X  Dia (mm ) X 0.00623  = Wt. Per. Mtr.

Dia ( mm ) X  Dia (mm ) X 0.0019    = Wt. Per. Feet.

Weight of Stainless Steel Square Bar

Dia ( mm ) X  Dia ( mm ) X 0.00788 = Wt. Per. Mtr

Dia ( mm ) X  Dia ( mm ) X 0.0024   =  Wt.Per. Feet.

Weight of Stainless Steel Hexagonal Bar

Dia ( mm )     X  Dia ( mm ) X 0.00680    =  Wt. Per.Mtr

Width ( mm ) X  Dia ( mm )  X 0.002072 =  Wt. Per Feet

Weight of Stainless Steel Flat Bar

Width  (mm ) X  Thick ( mm ) X 0.00798 = Wt.Per Mtr.

Width  (mm ) X  Thick ( mm ) X 0.00243 = Wt.Per Feet.

PREN for various Grades of Stainless Steel

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 40.2
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 40.2

Alternative Grades to Stainless Steel 316L Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel Bars

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel Square Bars

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel Square Bars

As a standard, Asiamet provides all stainless steel square bar marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Square Bars

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel square bar are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

Reviews

There are no reviews yet.

Be the first to review “316L Stainless Steel Square Bars”

Your email address will not be published. Required fields are marked *

error: Content is protected !!