Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

Stainless Steel 310 Bars Manufacturers. Buy 100% UT, Chemical & Mechanical Tested 310 Stainless Steel Bars!

///310 Stainless Steel Bars

310 Stainless Steel Bars

390

Suppliers of 310 Stainless Steel Bars, UNS S31000, 1.4841 SS Bars! Lowest Steel Bars Prices!

Are you looking for a genuine and professional manufacturer and supplier of 310 stainless steel bars? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

We pride ourselves in the stockholding and processing of stainless steels bars in 310 grade. All forms of mechanical and non-destructive testing can be provided for stainless steel 310 bars against national and international specifications or customers own requirements. The 310 stainless steel bars and rods are available in various sizes ranging from 3mm to 400mm. We are also able to provide a cutting service to meet your individual requirements.

  • Stainless steel 310 bar is also typically supplied as Cold Drawn or Hot Rolled product, and is available in cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP.
  • Standard Specification 310 Stainless Steel Bars – ASTM A276, ASTM A484, ASTM A479, ASTM A182

Our Company, Asiamet is a well known supplier of stainless steel 304 bars produced from high quality raw materials, as per international standards. With an experienced and professional sales team, we supply stainless steel 304 bar products to many countries and all over India. We have in in house cutting and stainless steel 304 bars processing machines enabling us to supply our products to meet your most specific requirement in terms of diameter, length and surface finish.

Why Choose Asiamet as your Supplier for Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars?

  • Competitive or Lowest Prices for 310 Stainless Steel Bars – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel 310 bars. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for 310 Stainless Steel Bars – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for 310 Stainless Steel Bars– Since we are a leading stockholder and direct mill buyer of stainless steel 310 bars, we can offer delivery of cut to length stainless steel bars in 1 or 2 days. For production quantities, we can supply stainless steel 310 bars with shortest possible lead times.
  • In House 310 Stainless Steel Bars Processing Facilities – We have in house stainless steel 310 bars processing facilities enabling us to deliver the product in various forms other than standard sizes.

Description

Stainless Steel 310 Bars, UNS S31000, 1.4841 Manufacturers & Suppliers in India – 310 Stainless Steel Bars With Black & Bright Finishes Available!

Asiamet is one of the biggest manufacturers and producers for stainless steel 310 bars in various shapes such as round, square, hex, flat, angle, and channel. We can supply various sizes of 310 stainless steel bars at the most competitive prices in the industry. Stainless steel 310 bars supplied by Asiamet, are widely used in many industries. Finishes on 310 stainless steel bars can vary and include cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP.

Due to its anti-corrosive properties, stainless steel 310 bars have become essential in the manufacturing of parts for the medical, tooling, mechanical, engineering and food industries.

  • 303 stainless steel bars- has good corrosion resistance, free machining, not suitable for welding or forming.
  • 304 stainless steel bars – has good corrosion resistance, suitable for forming and welding, average machining.
  • 316 stainless steel bars – Is our highest grade and has excellent corrosion resistance, is suitable for forming and welding, but is a little harder to machine

Stainless steel is one of the most widely used and versatile type of steel. Stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. There are more than 60 grades of stainless steel and divided into five families.

Production & Stock Range for Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars

Product Stainless Steel 310 Bars
Specifications ASTM/ASME A/SA276, ASTM/ASME A/SA479, ASTM/ASME A/SA 484
Thickness 1000mm, 2000mm, 4000mm, 6000mm, Custom Cut Length – Standard length is 4-6 MTR
Size 5.5mm to 500mm (Diameter Tolerance – H9, H11, H13 etc. as per clients’ requirement)
Testing 100% Ultrasonic Test, Chemical & Mechanical Testing
Shapes or Types Black, Peeled, Polished, Bright, Hair Line, Brush, Sand Blast
Type Hot Rolled, Cold Drawn, Centerless Grinding, Forged
Shape Flat, Square, Round, Rings, Angles, Channels, Beams, Hexagonal, Rectangular, Hollows, Blocks and Special Shapes, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging etc.
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Viraj, Mukund, Laxcon, Imported, Jindal, Other Indian Manufacturers
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Chemical Composition (%) of Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00

Mechanical Properties of Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars

GRADE Tensile Strength : Unit – ksi (MPa) , Minimum Yield Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum Elongation : in 2″, Unit : % , Minimum HARDNESS
310/310S 75 (515) 30 (205) 40 95 HRB max
310H 75 (515) 30 (205) 40 95 HRB max

Grade 310 Grade 310S
Typical Minimum Typical Minimum
Tensile Strength, MPa 625 515 575 515
Yield Stress (0.2 % offset), MPa 350 205 290 205
Elongation (Percent in 50mm) 50 40 50 40
Hardness (Brinell) 172 156
Endurance (fatigue) limit, MPa 260 260

Physical Properties of Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
310 – 310S 7750 200 15.9 16.2 17 14.2 18.7 500 720

Properties of 310 Stainless Steel Bars at Elevated Temperatures

Short Time Elevated Temperature Tensile Strength
Temperature, oC 550 650 750 850 950 1050
Tensile Strength, MPa 550 430 280 180 90 50

Creep Data for Stainless Steel 310 Bars

Stress to develop a creep rate of 1% in the indicated time at the indicated temperature.
Time TemperatureoC 550 600 650 700 750 800
10 000 h Stress MPa 110 90 70 40 30 15
100 000 h Stress MPa 90 75 50 30 20 10
Creep Rupture Stress
Time Temperature oC 600 700 800 900 1000
1 000 h Stress MPa 190 110 50 35 15
10 000 h Stress MPa 170 70 35 20 10
100 000 h Stress MPa 110 55 25 10 2
Recommended Maximum Service Temperature (Oxidizing Conditions)
Continuous                     1150oC
Intermittent                      1035oC


Equivalents of Various Grades of 
Stainless Steel 310 Bars, UNS S31000, 1.4841 SS Bars

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21


Chemical Composition of Various Grades of Stainless Steel Bars

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Various Grades of Stainless Steel Bars

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

Weight Calculation of Stainless Steel Bars

Weight of  Stainless Steel Round Bar

Dia ( mm ) X  Dia (mm ) X 0.00623  = Wt. Per. Mtr.

Dia ( mm ) X  Dia (mm ) X 0.0019    = Wt. Per. Feet.

Weight of Stainless Steel Square Bar

Dia ( mm ) X  Dia ( mm ) X 0.00788 = Wt. Per. Mtr

Dia ( mm ) X  Dia ( mm ) X 0.0024   =  Wt.Per. Feet.

Weight of Stainless Steel Hexagonal Bar

Dia ( mm )     X  Dia ( mm ) X 0.00680    =  Wt. Per.Mtr

Width ( mm ) X  Dia ( mm )  X 0.002072 =  Wt. Per Feet

Weight of Stainless Steel Flat Bar

Width  (mm ) X  Thick ( mm ) X 0.00798 = Wt.Per Mtr.

Width  (mm ) X  Thick ( mm ) X 0.00243 = Wt.Per Feet.

PREN for Various Grades of Stainless Steel

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 402
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 402
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 402

Alternative Grades to Stainless Steel 310 Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel Bars

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel Bars

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel Bars

As a standard, Asiamet provides all stainless steel bars marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Bars

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel bars are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

Reviews

There are no reviews yet.

Be the first to review “310 Stainless Steel Bars”

Your email address will not be published. Required fields are marked *

error: Content is protected !!