Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

SS 317 Sheets Suppliers. UNS S31700, 1.4449, Stainless Steel 317 Sheets

///317 Stainless Steel Sheet

317 Stainless Steel Sheet

345

Manufacturers & Suppliers of 317 Stainless Steel Sheets, UNS S31700, 1.4449 SS Sheets

Are you looking for a genuine and professional manufacturer and supplier of 317 stainless steel sheets? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

  • UNS S31700 sheets Available for Sale in Thickness 0.1mm to 6.0mm
  • WNR. 1.4449 sheets Available for Sale in Thickness 0.1mm to 6.0mm
  • ASTM A240 317 Stainless Steel Sheets Available for Sale in Thickness 0.1mm to 6.0mm

Stainless Steel 317 Sheets in Stock Now & Ready to Deliver Today! Our Company, Asiamet is a well known manufacturer and supplier of stainless steel 317 sheets designed and manufactured from high quality raw materials, as per international standards. We have supply of our stainless steel 317 sheet products to many countries and all over India.

  • 317 – It is used at temperatures up to 925°C in continuous service, and 879°C in intermittent service.
  • The pitting resistance equivalent number (PREN) for stainless steel 317 sheets is around 31.
  • With a minimum Tensile Strength of 515 Mpa, Yield Strength of 205 Mpa and minimum Elongation of 35, stainless steel 317 sheets exhibit good mechanical properties.

Asiamet is a stockholder and distributor of stainless steel 317 sheets manufactured as per ASTM A240 in various sizes and grades such as 317/317L. We have in house plasma, laser, water-jet cutting facilities, enabling us to supply our stainless steel 317 sheet products to meet your specific requirement in terms of thickness, width and length. Aisamet is a leading supplier of SS 317 sheets in a thickness range of  “0.1 mm to 6.0 mm” in various forms such as squares, rectangles, circles, r​ings cut to specification.

Why Choose Asiamet as your Supplier for Stainless Steel 317 Sheets,UNS S31700, 1.4449 SS Sheets?

  • Competitive or Lowest Prices for Stainless Steel 317 Sheets – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel 317 sheets. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for Stainless Steel 317 Sheets – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for Stainless Steel 317 Sheets – Since we are a leading stockholder and direct mill buyer of stainless steel 317 sheets, we can offer delivery of standard size stainless steel 317 sheets in 1 or 2 days. For production quantities, we can supply stainless steel 317 sheets with shortest possible lead times.
  • In House 317 Stainless Steel Sheet Processing Facilities – We have in house stainless steel 317 sheet processing facilities enabling us to deliver the product in various forms other than standard sizes. In case of stainless steel 317 sheets, we can offer cut to size sheets, sheet cut circles, rings and blocks.

Description

Stainless Steel 317 Sheets, UNS S31700, 1.4449 SS Sheets, 317 Stainless Steel Sheets Supplier in India

We Deliver The Highest Quality Stainless Steel UNS S31700, 1.4449 SS Sheets! Asiamet is a full line distributor of stainless steel 317 sheets. We can offer various value added services such as cut-to-length, polishing, bending, rolling, shearing, manual or automated punching & forming, and welding (MIG, TIG & spot welding). 317 stainless steel sheets are available in stock with Asiamet in various variant such as SS 317/317L.

317 stainless steel is one of the most widely used and versatile type of steel. 317 stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes

Stainless steel 317 sheet is used to manufacture products in a variety of industries where extreme conditions may exist such as marine, oil & gas, chemical processing, power generation, food processing, wastewater and other applications. Asiamet is a stockist, supplier and exporter of high quality stainless steel sheets as per ASTM A240 in various sizes and grades such as 304/304L, 310/310S, 316/316L/316Ti, 321/321H, 347/347H & Duplex 2205.

Stainless steel 304 sheet is typically sold in the annealed condition and is available in 0.1mm to 6.0mm in cold rolled and hot rolled form. Our 304 stainless steel sheets come in both 2B finish and various polished finishes such as 2D, BA, No.1, No.4, No.8, 8K, Mirror and Matte, with PVC Coating.

Difference between Stainless Steel Sheets & Stainless Steel Plates

The difference between stainless steel sheets and stainless steel plate is the thickness to which the metal is rolled out. Stainless steel plate generally has a thickness more than 6mm and stainless steel sheet has a thickness of less than 6mm, but greater than that of foil.

Unlike stainless steel plates, stainless steel sheets can be supplied in various finishes such as No.4 (Matte), BA, Mirror No. 8 and Satin finish. Stainless steel sheets are generally available in cold rolled form, with basic 2B finish, which is suitable for further processing in machines to obtain various finishes. However, stainless steel plates are generally hot rolled annealed and pickled (HRAP) with No. 1 mill finish, which is not suitable to process further to obtain matte or mirror finish.

Due to its anti-corrosive properties, stainless steel sheets have become essential in the composition of parts for the medical, tooling, mechanical and food industries. Stainless steel sheets are widely used in various industries as mentioned in the below table.

Standard Welding Processes for UNS S31700, 1.4449 SS Sheets, Stainless Steel 317 Sheets

TIG-Welding  Arc Welding (E)
 MAG-Welding Solid Wire  Laser Beam Welding

 

Production & Stock Range for Stainless Steel 317 Sheets, UNS S31700, 1.4449 SS Sheets

Product Stainless Steel 317 Sheets
Standard ASTM A240, AISI, EN
Thickness 0.1mm-6.0mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, Custom Length
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Brush Finish, Etching
Type Hot Rolled Stainless Steel Sheets (HR 2.5mm to 6mm), Cold Rolled Stainless Steel Sheets (CR 0.1mm to 6mm)
Shape Flat
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Jindal, POSCO, Aperam, TISCO, Outokumpu
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time  Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Chemical Composition (%) of Stainless Steel 317 Sheets, UNS S31700, 1.4449 SS Sheets

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
317 0.08 1 2 0.04 0.03 11 – 14 18 – 20
317L 0.035 1 2 0.04 0.03 11 – 15 18 – 20

Mechanical Properties of Stainless Steel 317 Sheets, UNS S31700, 1.4449 SS Sheets

GRADE Tensile Strength : Unit – ksi (MPa) , Minimum Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum Elongation : in 2″, Unit : % , Minimum HARDNE SS
317 75 (515) 30 (205) 35 95 HRB max
317L 75 (515) 30 (205) 40 95 HRB max

Equivalents of Various Grades of Stainless Steel 317 Sheets, UNS S31700, 1.4449 SS Sheets

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4


Chemical Composition of Various Grades of Stainless Steel Sheets

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Stainless Steel Sheets

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

PREN for various Grades of Stainless Steel Sheets

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 402
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 402
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 402

Alternative Grades to Stainless Steel 317 Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel sheets

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel sheets

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel sheets

As a standard, Asiamet provides all stainless steel sheets marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Sheets

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel sheets are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

Reviews

There are no reviews yet.

Be the first to review “317 Stainless Steel Sheet”

Your email address will not be published. Required fields are marked *

error: Content is protected !!