Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

SS Strip Suppliers. Buy Top Quality Stainless Steel Strips at Lowest Prices!

///Stainless Steel Strips

Stainless Steel Strips

190

(1 customer review)

Manufacturers & Suppliers of Stainless Steel Strips!

Are you looking for a genuine and professional manufacturer and supplier of stainless steel strips in India? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

  • Stainless Steel Strip is available in a wide variety of grades the most common being 201, 410, 430, 304/304L and 316L.
  • Stainless Steel Strip is also typically supplied as Cold Rolled or Hot Rolled product, and is available in the following finishes: No. 1, 2B, No.4, Mirror, BA with or without PVC.
  • Specification for SS Coils- Tolerance to ASTM A480M, Chemical to ASTM A240, Mechanical to ASTM A240
  • Tempers – Annealed, Quarter Hard, Half Hard, Three-Quarter Hard, Hard as Rolled, Full Hard, Extra Hard, Spring

Stainless Steel Strips in Stock Now & Ready to Deliver Today! Asiamet is a supplier of ss strips in a variety of thicknesses ranging from (in mm) 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 2.5, 3mm and heavier gauges. Our widths (in mm) for stainless steel strips ranges from 12mm to 800mm, while the most common grades we stock are 201, 410, 430, 304/304L and 316L.

Our Company, Asiamet is a well known supplier of stainless steel strips produced from high quality raw materials, as per international standards. With an experienced and professional sales team, we supply stainless steel strip products to many countries and all over India.

Asiamet is a stockholder and distributor of stainless steel strips manufactured as per ASTM A240 in various sizes and grades such as 304/304L, 316/316L, 321/321H, 347/347H & Duplex. We have in shearing, slitting and blanking machines, enabling us to supply our stainless steel strip products to meet your specific requirement in terms of thickness, width and length.

Why Choose Asiamet as your Supplier for Stainless Steel Strips?

  • Competitive or Lowest Prices for Stainless Steel Strips – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel strips. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for Stainless Steel Strips – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for Stainless Steel Strips – Since we are a leading stockholder and direct mill buyer of stainless steel coils, we can offer delivery of cut to width stainless steel strips in 1 or 2 days. For production quantities, we can supply stainless steel strips with shortest possible lead times.
  • In House Stainless Steel Strips Processing Facilities – We have in house stainless steel strips processing facilities enabling us to deliver the product in various forms other than standard sizes.

Description

Stainless Steel Strips in Stock Now & Ready to Deliver Today! Best Prices for Stainless Steel Strip (201, 304, 321, 316L, 310S, 430, 441)

We Deliver The Highest Quality Stainless Steel Strips! Asiamet is a full line distributor of 200, 300 and 400 series stainless steel strips. We can offer various value added services such as cut-to-length cutting, polishing, slitting, bending, rolling, shearing or automated punching & forming. Stainless steel strips are available in stock with Asiamet in various grades such as SS 201, SS 430, SS 441, SS 304/304L, 316/316L, 904L, 347/347H, and 321/321H.

Stainless steel strips have a wide range of microstructures which are controlled by composition and strips can be used for a wide range of applications from food industries, chemical industries to electrical industries and generator industries. Stainless steel strips can be offered on various parameters thereby ensuring the durability and finishing of the products for more finishes. Wide range of stainless steel strip in coils are available including Austenitic Stainless Steel 300 series, Ferritic 400 series. Common widths of stainless steel strip is 12mm to 800mm, in thickness range of 0.1mm to 6mm. We specialise in the supply of stainless steel strips customized as per clients requirements.

Stainless steel is one of the most widely used and versatile type of steel. Stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. There are more than 60 grades of stainless steel and divided into five families.

Stainless steel strip is used to manufacture products in a variety of industries such as food industries, chemical industries to electrical industries and generator industries. Stainless steel strips are also used in various architectural applications and sheet metal component manufacturing industry. Stainless steel strips can be easily formed into various shapes, and polished as per customer requirements, making it the most important raw material for sheet metal component industry.

Asiamet is a stockist, supplier and exporter of high quality stainless steel strips as per ASTM A240 in various sizes and grades such as SS 430, SS 410, SS 201, SS 202, 304/304L, 316/316L, 321/321H, 347/347H & Duplex 2205 and all size are available in Mumbai, all over India.

Due to its anti-corrosive properties, stainless steel strips have become essential in the composition of parts for the medical, tooling, mechanical and food industries. Stainless steel strips are widely used in various industries as mentioned in the below table.

Production & Stock Range for Stainless Steel Strips

Product Stainless Steel Strips
Type Hot Rolled Stainless Steel Strips (HR 2.5mm to 6mm), Cold Rolled Stainless Steel Strips (CR 0.1mm to 6mm)
Grades 201, 202, 301, 303, 304, 304L, 316, 316L, 321, 310S, 401, 409, 410, 420, 430, 904L, 321, 321H, 347, 347H, Duplex, Super Duplex
Specifications ASTM  / ASME A240/SA240
Thickness 0.1 to 6mm
Width 12mm to 800mm
Tempers Annealed, Quarter Hard, Half Hard, Three-Quarter Hard, Hard as Rolled, Full Hard, Extra Hard, Spring
Surface Finish 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Brush Finish, Etching
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Jindal, POSCO, Aperam, TISCO, Outokumpu
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Architectural, Sheet Metal Components, Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Equivalents of Various Grades of Stainless Steel Strips

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H 1.4301 S30409
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2
430 1.4016 S43000
2205 Duplex 1.4462 S31803/S32205
420 1.4021/1.4028/

1.4031/1.4034

S42000
431 1.4057 S43100 S80 (aerospace grade)
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
304LN 1.4311 S30453
409 1.4512 S40900
430F 1.4105 S43020
303 1.4305 S30300
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5 Z2 NCDU 25-20 X1NiCrMoCu25-20-5
SS 317 1.4449 S31700 SUS 317
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9
SS 347 1.455 S34700 SUS 347 08Ch18N12B X6CrNiNb18-10
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12
SS 410 1.4006 S41000 SUS 410 410S21 X12Cr13
SS 446 1.4762 S44600

Chemical Composition of Stainless Steel Strips

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Stainless Steel Strips

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

PREN for various Grades of Stainless Steel

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 402
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 402
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 402

Alternative Grades to Stainless Steel 304 Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel Strips

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel Strips

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel Strips

As a standard, Asiamet provides all stainless steel strips marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Strips

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel strips are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

1 review for Stainless Steel Strips

  1. Vijay Rastogi

    The quality of strips is really nice. We have received the goods on time. thanks for your help.

Add a review

Your email address will not be published. Required fields are marked *