Manufacturers & Suppliers of Steel Plates, Sheets, Pipes, Angles, Bars, Channels, I Beams Call Us +919619672006 | +919930002070 | sales@asiametsteel.com

SS 304 Strip Suppliers. UNS S30400, 1.4301, Stainless Steel 304 Strips

///304 Stainless Steel Strips

304 Stainless Steel Strips

180

Manufacturers & Suppliers of 304 Stainless Steel Strips, UNS S30400 Coils, 1.4301 SS Strips!

Are you looking for a genuine and professional manufacturer and supplier of 304 stainless steel strips? Call us now at +919930002070! or Email Us on sales@asiametsteel.com

  • UNS S30400 Strips Available for Sale in Thickness 0.1mm to 6.0mm
  • WNR. 1.4301 Strips Available for Sale in Thickness 0.1mm to 6.0mm
  • ASTM A240 304 Stainless Steel Strips Available for Sale in Thickness 0.1mm to 6.0mm

Stainless Steel 304 Strips in Stock Now & Ready to Deliver Today! Our Company, Asiamet is a well known manufacturer and supplier of stainless steel 304 strips designed and manufactured from high quality raw materials, in a variety of thicknesses ranging from (in mm) 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 2.5, 3mm and heavier gauges. Our widths (in mm) for stainless steel strips ranges from 12mm to 800mm, while the most common grades we stock are 201, 410, 430, 304/304L and 316L as per international standards. We have supply of our stainless steel 304 strip products to many countries and all over India.

  • 304 – It is used at temperatures up to 925°C in continuous service, and 870°C in intermittent service.
  • The pitting resistance equivalent number (PREN) for stainless steel 304 strips is around 20.
  • With a minimum Tensile Strength of 485 Mpa, Yield Strength of 170 Mpa and minimum Elongation of 40, stainless steel 304L strips exhibit good mechanical properties.
  • Tempers – Annealed, Quarter Hard, Half Hard, Three-Quarter Hard, Hard as Rolled, Full Hard, Extra Hard, Spring

Asiamet is a stockholder and distributor of stainless steel 304 strips manufactured as per ASTM A240 in various sizes and grades such as 304/304L/304H. We have in house plasma, laser, water-jet cutting facilities, enabling us to supply our stainless steel 304 strip products to meet your specific requirement in terms of thickness, width and length.

Why Choose Asiamet as your Supplier for Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips?

  • Competitive or Lowest Prices for Stainless Steel 304 Strips – At Asiamet, we are committed to provide our customers with lowest possible prices for stainless steel 304 strips. With higher volumes, we can also offer quantity discounts.
  • Certification & Testing for Stainless Steel 304 Strips – All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports
  • Short Lead Times for Stainless Steel 304 Strips – Since we are a leading stockholder and direct mill buyer of stainless steel 304 strips, we can offer delivery of standard size stainless steel 304 strips in 1 or 2 days. For production quantities, we can supply stainless steel 304 strips with shortest possible lead times.
  • In House 304 Stainless Steel Strips Processing Facilities – We have in house stainless steel 304 strip processing facilities enabling us to deliver the product in various forms other than standard sizes. In case of stainless steel 304 strips, we can offer cut to size strips, strip cut circles, rings and blocks.

Description

Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips, 304 Stainless Steel Strips Supplier in India

We Deliver The Highest Quality Stainless Steel UNS S30400, 1.4301 & SS 304 Strips! Asiamet is a full line distributor of stainless steel 304 strips. We can offer various value added services such as cut-to-length, polishing, bending, rolling, shearing, manual or automated punching & forming, and welding (MIG, TIG & spot welding). 304 Stainless steel strip are available in stock with Asiamet in various variant such as SS 304/304L/ 304H.

Stainless steel strips have a wide range of microstructures which are controlled by composition and strips can be used for a wide range of applications from food industries, chemical industries to electrical industries and generator industries. Stainless steel strips can be offered on various parameters thereby ensuring the durability and finishing of the products for more finishes. Wide range of stainless steel strip in coils are available including Austenitic Stainless Steel 300 series, Ferritic 400 series. Common widths of stainless steel strip is 12mm to 800mm, in thickness range of 0.1mm to 6mm. We specialise in the supply of stainless steel strips customized as per clients requirements.

Common widths of stainless steel strip is 12mm to 800mm . Stainless steel strips can be cut as per clients requirements into strips. Asiamet carries a wide range of thickness 0.1mm is the thinnest gauge going up until 6.0 mm in stainless steel strips.

304 Stainless steel is one of the most widely used and versatile type of steel. 304 stainless steel is often referred to as ‘corrosion-resistant steel’ – it does not stain, corrode or rust as easily as normal carbon steel. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes

Stainless steel 304 strip is used to manufacture products in a variety of industries such as food industries, chemical industries to electrical industries and generator industries. Stainless steel strips are also used in various architectural applications and sheet metal component manufacturing industry. Stainless steel strips can be easily formed into various shapes, and polished as per customer requirements, making it the most important raw material for sheet metal component industry. Stainless steel strips can be easily formed into various shapes, and polished as per customer requirements, making it the most important raw material for strip metal component industry. Asiamet is a stockist, supplier and exporter of high quality stainless steel strips as per ASTM A240 in various sizes and grades such as 304/304L, 316/316L, 321/321H, 347/347H & Duplex 2205.

Due to its anti-corrosive properties, stainless steel strips have become essential in the composition of parts for the medical, tooling, mechanical and food industries. Stainless steel strips are widely used in various industries as mentioned in the below table.

Production & Stock Range for Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips

Product Stainless Steel 304/304L Strips
Standard ASTM A240, AISI, EN
Thickness 0.1mm to 6.0mm
Width 12mm to 800mm
Tempers Annealed, Quarter Hard, Half Hard, Three-Quarter Hard, Hard as Rolled, Full Hard, Extra Hard, Spring
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Brush Finish, Etching
Type Hot Rolled Stainless Steel Strips (HR 2.5mm to 6mm), Cold Rolled Stainless Steel Strips (CR 0.1mm to 6mm)
Shape Flat
Value Added Services Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing
Manufacturers Jindal, POSCO, Aperam, TISCO, Outokumpu
Origin of Goods India, Europe, Japanese, UK, Korea, Thailand, Taiwan.
Export Countries Saudi Arabia, Tanzania, Africa, Nigeria, Qatar, Oman, UAE and Other Middle East Nations
Delivery Time Immediate for Goods in Ready Stock, 10-40 Days for Production QTY’s
Packing Wooden Pallets, Export Sea-Worthy Packing
Applications Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry
Test Certificates As per EN 10204 3.1
Inspection Seller Inspection, Buyer Inspection or Third Party Inspection

Chemical Composition (%) of Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
304H 0.10 0.75 2.00 0.045 0.03 8.00-10.5 18.00-20.00

Mechanical Properties of Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips

GRADE Tensile Strength : Unit – ksi (MPa) , Minimum Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum Elongation : in 2″, Unit : % , Minimum HARDNESS
304 75 (515) 30 (205) 40 92 HRB max
304L 70 (485) 25 (170) 40 92 HRB max
304H 75 (515) 30 (205) 40 92 HRB max

Equivalents of Various Grades of Stainless Steel 304 Strips, UNS S30400, 1.4301 SS Strips

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H 1.4301 S30409


Chemical Composition of Various Grades of Stainless Steel Strips

Grade C≤ Si≤ Mn≤ P≤ S≤ Ni Cr
201 0.15 1 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00
202 0.15 1 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00
304 0.08 1 2 .00 0.045 0.03 8.00-11.00 18.00-20.00
304L 0.03 1 2 .00 0.045 0.03 8.00-12.00 18.00-20.00
309 0.2 1 2 .00 0.04 0.03 12.00-15.00 22.00-24.00
309S 0.08 1 2 .00 0.045 0.03 12.00-15.00 22.00-24.00
310 0.25 1.5 2 .00 0.04 0.03 19.00-22.00 24.00-26.00
310S 0.08 1 2 .00 0.045 0.03 19.00-22.00 24.00-26.00
316 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316L 0.03 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
316Ti 0.08 1 2 .00 0.045 0.03 10.00-14.00 16.00-18.00
410 0.15 1 1 .00 0.04 0.03 0.6 11.50-13.50
430 0.12 0.12 1 0.04 0.03 0.6 16.00-18.00

Mechanical Properties of Stainless Steel Strips

Grades Density Melting Point Tensile Strength (min.) Yield Strength (0.2%Offset) (min.) Elongation (min.)
304 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
304L 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
310 7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%
316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
316TI 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
317L 7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
321 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
347 8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35%
904L 7.95 g/cm3 1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%
446 7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20%

PREN for various Grades of Stainless Steel

What is PREN?

Pitting resistance equivalent numbers (PREN) are a theoretical way of comparing the pitting corrosion resistance of various types of stainless steels, based on their chemical compositions. In general, the higher PREN-value, the more resistant is the stainless steel to localized pitting corrosion by chloride. The elements which have a significant impact are chromium, molybdenum and nitrogen.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

Grade Type Cr Mo N PREN
Ferritic
1.4003 10.5-12.5 NS 0.030 max 10.5-12.5
1.4016 430 16.0-18.0 NS NS 16.0-18.0
1.4113 434 16.0-18.0 0.9-1.4 NS 19.0-22.6
1.4509 441 17.5-18.5 NS NS 17.5-18.5
1.4521 444 17.0-20.0 1.8-2.5 0.030max 23.0-28.7
Austenitic
1.4301 304 17.5-19.5 NS 0.11max 17.5-20.8
1.4311 304LN 17.5-19.5 NS 0.12-0.22 19.4-23.0
1.4401/4 316/316L 16.5-18.5 2.0-2.5 0.11max 23.1-28.5
1.4435 316L (2.5% min Mo) 17.0-19.0 2.5-3.0 0.11max 25.3-30.7
1.4406 316LN 16.5-18.5 2.0-2.5 0.12-0.22 25.0-30.3
1.4539 904L 19.0-21.0 4.0-5.0 0.15max 32.2-39.9
1.4563 Sanicro 28 24.0-26.0 3.0-4.0 0.11max 35.9-43.0
1.4547 254SMO 19.5-20.5 6.0-7.0 0.18-0.25 42.2-47.6
1.4529 1925hMo 19.0-21.0 6.0-7.0 0.15-0.25 41.2-48.1
1.4565 4565S 24.0-26.0 4.0-5.0 0.30-0.60 42.0-52.1
Duplex
1.40621 2202 22 0.4 0.2 26.5
1.4162 2101LDX 21.0-22.0 0.1-0.8 0.20-0.25 24.5-28.6
1.4362 SAF 2304 22.0-24.0 0.1-0.6 0.05-0.20 23.1-29.2
1.4462 SAF 2205 21.0-23.0 2.5-3.5 0.10-0.22 30.8-38.1
1.44102 SAF 2507 24.0-26.0 3.0-4.0 0.24-0.35 > 402
1.45012 Zeron 1002 24.0-26.0 3.0-4.0 0.20-0.30 > 402
1.45072 Ferrinox 2552 24.0-26.0 3.0-4.0 0.20-0.30 > 402

Alternative Grades to Stainless Steel 304 Grade

Features
303 Stainless steel 303 grade can be used when higher machinability is needed, and lower corrosion resistance, formability and weldability are acceptable.
316 Stainless steel 316 grade can be used when higher resistance to pitting and crevice corrosion is required, in chloride environments.
321 Stainless steel 321 grade can be used when better resistance to temperatures of around 600-900°C is needed. 321 has higher hot strength.
3CR12 Stainless steel 3CR12 can be used when lower cost is required, and the reduced corrosion resistance and resulting discoloration are acceptable.
430 Stainless steel 430 grade is acceptable when a lower cost is required, and the reduced corrosion resistance and fabrication characteristic are acceptable.

Service Temperature of Various Grades of Stainless Steel Strips

Grade Intermittent service temperature Continuous service temperature
304 1600°F 1700°F
(870°C) (925°C)
316 1600°F 1700°F
(870°C) (925°C)
309 1800°F 2000°F
(980°C) (1095°C)
310 1900°F 2100°F
(1035°C) (1150°C)
410 1500°F 1300°F
(815°C) (705°C)
420 1350°F 1150°F
(735°C) (620°C)
430 1600°F 1500°F
(870°C) (815°C)

Testing of Stainless Steel Strips

  • Manufacturer’s Test Certificate is Provided – Our materials undergo strict quality tests before dispatching them to our clients. All are materials are supplied with Mill Test Certificates, as per EN 10204 3.1
  • Various Testing: Mechanical Testing, Hardness Test, Chemical Analysis, Positive Material Identification (PMI), Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test.

Marking of Stainless Steel Strips

As a standard, Asiamet provides all stainless steel strips marked with Manufacturers Name, Size and Heat No., which can be co related with the test certificate for the product.

Packaging of Stainless Steel Strips

Asiamet is one of the best company in for delivery of goods with shortest lead times. Our products like stainless steel strips are packed to ensure that there is no damage in transit.

Documents Provided to Domestic & Overseas Customers

Certificate of Origin Legalized/Attested by Chamber of Commerce or Embassy
Commercial Invoice including HS Code
Packing List including number of boxes, net weight and gross weight, Marks and Numbers
Fumigation Certificates
Raw Material Test Reports
Heat Treatment Charts
Material Traceability Records
Quality Assurance Plan (QAP)
NABL Approved Laboratory Test Reports

Reviews

There are no reviews yet.

Be the first to review “304 Stainless Steel Strips”

Your email address will not be published. Required fields are marked *

error: Content is protected !!